Bargraph Digital Multimeter

Main Functions :
Special Automotive features include : Volts / Amps / Ohms / Frequency / Tacho / Dwell / Temperature / Pulse Width / Duty Cycle / Diode test / Continuity test / DTC's
Fully Autoranging, Primary and Secondary display, Bargraph, Overload protection and Auto power-off.

Ergonomic Features:
• Single knob selects function and range
• Rugged plastic enclosure
• Soft anti-slip rubber holster protects the instrument against impacts and chemicals
• Large easy to read 1/2" (12.5 mm) digits display
• Design allows comfortable hand holding or resting at convenient places horizontally or at an angle by using the stand at the back of the holster

Applications
• Measure engine RPM, ignition dwell angle, and temperature of exhaust manifold, cooling system, air conditioning, heating system, catalytic converter, etc.
• Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
• Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
• Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
• An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

Main Features
• State of the Art ergonomic design and styling for easier handling and use
• Full autorange features
• Large selectable 4¾ or 3¾ digit main display
• 4 digits secondary display
• 42 segments analog bargraph
• DC Voltage measurement up to 1000 Volt
• DC Voltage measurement up to 750 Volt
• AC/DC Current measurement up to 10 A
• Tachometer function with inductive pickup measures from 30 to 20000 rpm
• Dwell measurement in degrees from 0 to 360º or duty cycle from 0 to 100%
• Temperature measurement from -20ºC to 1000ºC or 0º to 1832ºF (selectable ºC or ºF)
• Resistance measurement up to 40 MOhm
• Frequency measurement from 10 to 20 KHz
• Fuel Injection test measures pulse width from 0.05 to 250 mS, or duty cycle from 0 to 100%
• Oxygen Sensor test function
• Alternator test function
• Fault Code Reader
• DTC Decoder
• Diode test
• Continuity Test
• Overload protection
• Soft holster for instrument protection
• Auto power off

General Specifications:
• Display:
o 4¾ digits main display
o 4 digits secondary display
o 42 Segments analog bargraph (20 updates/Second)
o Backlight
o Automatic( - ) negative polarity indicator
o Automatic Zeroing
o Automatic over-range indication
o Low battery indicator
• Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
• Physical dimensions (including holster) : 6.30” (H) x 3.22” (W) x 1.89” (D) - 160 mm x 82 mm x 48 mm
• Weight: Approximately 12.14 Oz ( 345 g) Including battery

Electrical Specifications:
• DC Voltage: 0 to ± 1000V, ±0.3% ± 2 dgts., 10MΩ input impedance
• AC Voltage: 0 to 750V, ±2.5% ± 5 dgts., 10MΩ input impedance, 50 to 500 Hz
• DC Current: 0 to ± 10A, ± 0.8 % ± 4 dgts.,
• AC Current: 0 to 10A, ± 0.8 % ± 4 dgts.
• Resistance: 0 to 40 MΩ ± 0.8% ± 5 dgts.,
• Frequency: 0 to 20 KHz, ± 0.01 % ± 2 dgts.
• Tachometer: 30 to 20000 RPM, ± 2 RPM
• Dwell: 0 to 360º, ± 1.2°/ krpm/cyl + 2d
• Fuel Injector (pulse width): 0.05 to 250 mS, ± 0.05 mS +1d
• Oxygen Test: Measures cross count up to 10/Second
• Alternator Test: Measures output voltage ripple, beeps if ripple exceeds 0.45V
• Fault code reader: Retrieves blink type fault codes
• DTC Decoder: Retrieves Impulse Code Diagnostic Trouble Codes
• Diode test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage
• Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm
• Temperature: -20º to 1000°C or 0°F to 1832°F (±2% + 1 dgts.)

Accessories Included:
• Battery: 9 Volt alkaline battery included
• Test probes: One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35½" long
• Temperature probe: Bead type K thermocouple
• Inductive Pickup for tachometer function
• Hard Storage/Carrying Case: Polypropylene foam padded case
• Soft protective holster
• User Manual